Unique flexible rubber nozzle and machined solid brass provides historic durability. Drive a vehicle over the Water Saver then still use it. If it is not stolen or lost this may be the last water nozzle you buy. Fits standard garden hose. No levers or triggers to break.
3 In 1 Super Spray
Alspray – Curved Brass Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Alspray – Curved Stainless Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Alspray – Straight Brass Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Alspray – Straight Stainless Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Fine Spray
FLKT – Pool Filter – Air Filter – Sprayer
Heavy Duty Water Savers Model A – Handle Option – Open Flow
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread - USA and European BSP
Hose ends are interchangeable other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Heavy Duty Water Savers Model A Open Flow
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread Standard USA or Euro BSP
Hose ends are interchangeable with other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Heavy Duty Water Savers Model B – Handle Option – Jet Stream
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread - USA and European BSP
Hose ends are interchangeable other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Heavy Duty Water Savers Model B Jet Stream
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread Standard USA or Euro BSP
Hose ends are interchangeable with other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Mini Water Saver
Overall length 4 5/8"
Available in 1/4" and 3/8" female NPT hose conections
All brass fittings
Molded nozzle of chemical resistant rubber
Can be utilized on normal well or water line pressure at continuous temperature up to 150 F. and occasional operation up to 212° F with proper personal protective equipment.
Model CV Brass
Model CV Stainless
1. Overall length is 10 1/8"
2. Equipped with 1/2" NPT connection machined brass fittings
3. Operates on normal water line pressure
4. Handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of - 40°F to + 150° F and a minimum burst 360 psi.
5. Tube assembly is 300 series stainless steel
2. Equipped with 1/2" NPT connection machined brass fittings
3. Operates on normal water line pressure
4. Handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of - 40°F to + 150° F and a minimum burst 360 psi.
5. Tube assembly is 300 series stainless steel
QUAD-T Dairy Teat Sprayer
1. Fine mist hollow cone spray pattern: approximately 7 oz/min @ 30 psi
2. Removable screen for cleaning and clog protection
3. Machined stainless steel spray tip assembly.
4. Stainless steel tube assembly.
5. 4 ply flexible rubber body with stainless valve assembly.
6. 1/4" NPT female thread
7. 10 1/4" overall length
2. Removable screen for cleaning and clog protection
3. Machined stainless steel spray tip assembly.
4. Stainless steel tube assembly.
5. 4 ply flexible rubber body with stainless valve assembly.
6. 1/4" NPT female thread
7. 10 1/4" overall length
Replacement Hose Ends Only
Standard water saver nozzle ends are smooth molded rubber.
Click here if you are looking for Heavy Duty Replacement Hose Ends.
Sanitizing Nozzle
Super Spray – Siphon
The super spray provides approximately three times the liquid volume over our standard cleaning guns.
1. Overall length is 9 1/2"
2. All brass fittings.
3. Available in 1/4" , 3/8" or 1/2" NPT hose connections.
4. Equipped with 8' oil resistant 1/2" siphon hose.
5. Adjustable siphon rate of water at 70 pounds air pressure is approximately 70-80 oz per minute at maximum.
6. The handle hose is manufactured with a Neoprene base tube and wrapped with 3 ply reinforcement carrying a 360 psi minimum burst.
7. Full cone spray pattern for uniform coverage
Water Driven Type B Chemical Sprayer only
1. Overall length of type B sprayer is 13"
2. Made of stainless steel and nicked plated brass components.
3. Flexible rubber body is manufactured from neoprene base tube and wrapped with 3-ply reinforcement with a temperature range of -40°F to + 150°F and a minimum burst of 360 psi.
4.1/4" NPT female inlets.
5. Includes QRS Adapter
2. Made of stainless steel and nicked plated brass components.
3. Flexible rubber body is manufactured from neoprene base tube and wrapped with 3-ply reinforcement with a temperature range of -40°F to + 150°F and a minimum burst of 360 psi.
4.1/4" NPT female inlets.
5. Includes QRS Adapter
Water Driven Type B Chemical Sprayer w/ 8′ Siphon Hose
You can see the level of chemical agent within the bottle throughout the operation but if all eyes are focused on the spraying action when supplies are depleted, the operator is alerted by a sputtering sound as the bottle empties.
1. Overall length of type B sprayer is 13"
2. Made of stainless steel and nicked plated brass components.
3. Flexible rubber body is manufactured from neoprene base tube and wrapped with 3-ply reinforcement with a temperature range of -40°F to + 150°F and a minimum burst of 360 psi.
4. Includes 8Ft. nitrile rubber siphon hose and QRS adapter
5. Sanitizer has 1/4" NPT female inlets.
6. Siphoned Chemical contacts only with stainless steel
1. Overall length of type B sprayer is 13"
2. Made of stainless steel and nicked plated brass components.
3. Flexible rubber body is manufactured from neoprene base tube and wrapped with 3-ply reinforcement with a temperature range of -40°F to + 150°F and a minimum burst of 360 psi.
4. Includes 8Ft. nitrile rubber siphon hose and QRS adapter
5. Sanitizer has 1/4" NPT female inlets.
6. Siphoned Chemical contacts only with stainless steel
Water Driven Type B Chemical Sprayer w/ Bottle Assembly
1. Overall length of type B sprayer is 13"
2. Made of stainless steel and nicked plated brass components.
3. Flexible rubber body is manufactured from neoprene base tube and wrapped with 3-ply reinforcement with a temperature range of -40°F to + 150°F and a minimum burst of 360 psi.
4. The siphon hose is constructed of nitrile rubber.
5. Sanitizer has 1/4" NPT female inlets.
6. Chemical from bottle contacts only with stainless steel
7. Includes QRS Adapter
2. Made of stainless steel and nicked plated brass components.
3. Flexible rubber body is manufactured from neoprene base tube and wrapped with 3-ply reinforcement with a temperature range of -40°F to + 150°F and a minimum burst of 360 psi.
4. The siphon hose is constructed of nitrile rubber.
5. Sanitizer has 1/4" NPT female inlets.
6. Chemical from bottle contacts only with stainless steel
7. Includes QRS Adapter