Unique flexible rubber nozzle and machined solid brass provides historic durability. Drive a vehicle over the Water Saver then still use it. If it is not stolen or lost this may be the last water nozzle you buy. Fits standard garden hose. No levers or triggers to break.
3 In 1 Super Spray
1. Solid machined brass with 4 ply flexible rubber body. 175 PSI max inlet pressure.
2. Air inlet is 1/4" female NPT
3. 3/4" standard garden hose fittings with adjustable ball valve
4. MADE IN USA
5. 3 Ft. Wash Wand cannot be used for siphon mode
36″ Wash Wand
Details will go here.
8 Ft. Siphon Hose w/ Garden Hose Fitting
Details will go here.
Alspray – 1/4″ Siphon Hose 120′
Black nitrile rubber
375" 00 x .195 ID
375" 00 x .195 ID
Alspray – 1/4″ Siphon Hose 60′
Black nitrile rubber
375" 00 x .195 ID
375" 00 x .195 ID
Alspray – 1/4″ Siphon Hose 8′
Black nitrile rubber
375" 00 x .195 ID
375" 00 x .195 ID
Alspray – Curved Brass Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Alspray – Curved Stainless Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Alspray – Straight Brass Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Alspray – Straight Stainless Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Dairy Teat Replacement Spray Tip and Screen
Details Here.
Fine Spray
Overall length 5 1/8"
Available in 1/4" and 3/8" female NPT hose connection
All brass fittings
Molded of chemical resistant black rubber
Will operate on normal well or water line pressure
Stainless steel valve assembly
FLKT – Pool Filter – Air Filter – Sprayer
Item FLKT spray kit includes:
* Handle assembly
* 2ft. long 360° wand
* 2ft. long fan spray wand
* Garden hose adapter
* Handle assembly
* 2ft. long 360° wand
* 2ft. long fan spray wand
* Garden hose adapter
Heavy Duty Replacement Hose Ends Only
Heavy duty nozzles are 4-ply wrapped rubber.
Heavy Duty Water Savers Model A – Handle Option – Open Flow
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread - USA and European BSP
Hose ends are interchangeable other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Heavy Duty Water Savers Model A Open Flow
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread Standard USA or Euro BSP
Hose ends are interchangeable with other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Heavy Duty Water Savers Model B – Handle Option – Jet Stream
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread - USA and European BSP
Hose ends are interchangeable other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Heavy Duty Water Savers Model B Jet Stream
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread Standard USA or Euro BSP
Hose ends are interchangeable with other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Mini Water Saver
Overall length 4 5/8"
Available in 1/4" and 3/8" female NPT hose conections
All brass fittings
Molded nozzle of chemical resistant rubber
Can be utilized on normal well or water line pressure at continuous temperature up to 150 F. and occasional operation up to 212° F with proper personal protective equipment.
Model CV Brass
1. Overall length is 10 1/8"
2. Equipped with 1/2" NPT connection
3. Operates on normal water line pressure
4. Handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of - 40°F to + 150° F and a minimum burst 360 psi.
2. Equipped with 1/2" NPT connection
3. Operates on normal water line pressure
4. Handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of - 40°F to + 150° F and a minimum burst 360 psi.
Model CV Stainless
1. Overall length is 10 1/8"
2. Equipped with 1/2" NPT connection machined brass fittings
3. Operates on normal water line pressure
4. Handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of - 40°F to + 150° F and a minimum burst 360 psi.
5. Tube assembly is 300 series stainless steel
2. Equipped with 1/2" NPT connection machined brass fittings
3. Operates on normal water line pressure
4. Handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of - 40°F to + 150° F and a minimum burst 360 psi.
5. Tube assembly is 300 series stainless steel
Nozzle Tip
Details will go here.
Poultry Flush Valve – Brass 1/4″ NPT
FV6 is 12" overall length.
FV12 is 18" overall length.
Poultry Flush Valve – Stainless 1/4″ NPT
FV6SS is 12" overall length.
FV12SS is 18" overall length.