FLEX IT’S ON… RELEASE IT’S OFF!
We made it – others copied it. If it does not say LONN it is not the original MADE IN THE USA since 1940. We offer customer support directly from our factory in Indianapolis, and a limited lifetime warranty as detailed in our Timeless Guarantee.
Super Durable Made in USA with Brass or Stainless Steel and EPDM Rubber
No messy leaks. Protect the environment and your wallet by saving water or air waste.
The Original WATER SAVER, since 1940
- Leak-Proof Garden Hose Nozzle
- Add-on 4 different Hose-End patterns for a wide range of uses: Jet Stream, Open Flow, Medium Flow, and Fan Spray
- Heavy Duty versions available in Jet Stream and Open Flow
- Stainless versions available for food-grade use
Buy Your Water Saver Today!
Water Saver – Jet Stream
Overall length 8 7/8"
All brass fittings with rubber bumpers to prevent scratching if dropped on equipment.
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal city or well water pressure. Not for use on boosted water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
Water Saver – Fan Spray
Overall length 8 7/8"
All brass fittings with rubber bumpers to prevent scratching if dropped on equipment.
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal city or well water pressure. Not for use on boosted water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
Water Saver – Open Flow
Overall length 8 7/8"
All brass fittings with rubber bumpers to prevent scratching if dropped on equipment.
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal city or well water pressure. Not for use on boosted water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
Water Saver – Medium Flow
Overall length 8 7/8"
All brass fittings with rubber bumpers to prevent scratching if dropped on equipment.
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal city or well water pressure. Not for use on boosted water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
Water Saver – Jet Stream – Stainless
USFDA food grade compliant 300 series stainless steel and USFDA compliant rubber nozzle
Overall length 8 7/8"
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP.)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal well or city water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
Water Saver – Fan Spray – Stainless
USFDA food grade compliant 300 series stainless steel and USFDA compliant rubber nozzle
Overall length 8 7/8"
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP.)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal well or city water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
Water Saver – Open Stream – Stainless
SFDA food grade compliant 300 series stainless steel and USFDA compliant rubber nozzle
Overall length 8 7/8"
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP.)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal well or city water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
Water Saver – Medium Stream – Stainless
SFDA food grade compliant 300 series stainless steel and USFDA compliant rubber nozzle
Overall length 8 7/8"
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP.)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal well or city water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
Heavy Duty Water Savers Model B Jet Stream
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread Standard USA or Euro BSP
Hose ends are interchangeable with other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Heavy Duty Water Savers Model A Open Flow
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread Standard USA or Euro BSP
Hose ends are interchangeable with other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Heavy Duty Water Savers Model B – Handle Option – Jet Stream
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread - USA and European BSP
Hose ends are interchangeable other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Heavy Duty Water Savers Model A – Handle Option – Open Flow
Overall length 8 7/8"
All brass fittings with exterior rubber bumpers.
Equipped with 3/4" garden hose thread - USA and European BSP
Hose ends are interchangeable other model water savers.
Hose end is manufactured from Neoprene base tube and wrapped with 3-ply reinforcement with a minimum burst of 360 psi ; temperature range is 40°F to 150°F or occasional operation of 212°F with proper personal protective equipment.
Max operating pressure is 175 PSI (12 BAR).
Mini Water Saver
Overall length 4 5/8"
Available in 1/4" and 3/8" female NPT hose conections
All brass fittings
Molded nozzle of chemical resistant rubber
Can be utilized on normal well or water line pressure at continuous temperature up to 150 F. and occasional operation up to 212° F with proper personal protective equipment.
Air Savers
- Leak-Proof Air Line Blow Gun
- Safety Tip version complies with OSHA requirements
- Accessories tips available for the Threaded Tip
- Will also work in water service
- 1/4″, 3/8″, or 1/2″ NPT
Buy Your Air Saver Today!
Model Win
Overall length 4 5/8"
Available in 1/4" and 3/8" female NPT inlet connections
Max InLet Pressure of 150psi
All brass fittings
Molded tip of chemical resistant rubber
Can be utilized on normal well or water line pressure at continuous temperature up to 150 F and occasional operation up to 212 F with proper personal protective equipment.
Safety Rubber Tip Air Saver/Blowgun
Model Val
Siphon Cleaning Guns
- Air-powered siphon spray guns are rugged and durable
- Brass, Nickel-Plated Brass, or Stainless Steel
- Curved or Straight
- 1/4″, 3/8″, or 1/2″ NPT
- Various lengths of siphon hose available
Buy Your Siphon Cleaning Gun Today!
Alspray – Curved Brass Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Alspray – Straight Brass Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Super Spray – Siphon
The super spray provides approximately three times the liquid volume over our standard cleaning guns.
1. Overall length is 9 1/2"
2. All brass fittings.
3. Available in 1/4" , 3/8" or 1/2" NPT hose connections.
4. Equipped with 8' oil resistant 1/2" siphon hose.
5. Adjustable siphon rate of water at 70 pounds air pressure is approximately 70-80 oz per minute at maximum.
6. The handle hose is manufactured with a Neoprene base tube and wrapped with 3 ply reinforcement carrying a 360 psi minimum burst.
7. Full cone spray pattern for uniform coverage
Alspray – Curved Stainless Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Alspray – Straight Stainless Cleaning Gun
Hand assembled in Indianapolis, the Alspray has solid brass or stainless steel fittings and a 4 ply reinforced flexible rubber body.
1. The Straight Models are 13" long and the Curved Models are 16 1/2" long.
2. All models come with 8' of nitrile rubber siphon hose
3. All Cleaning Guns are available with 1/4", 3/8" or 1/2" NPT female connections
4. The stainless models are designed such that the siphoned chemical only comes into contact with stainless steel.
5. Will operate without adjustment on any air pressure from 35 to 175 psi. Do not operate at less than 35 psi
Alspray Fog Gun Curved w/ Plastic Bottle
1. Siphoned chemical will only come into contact with stainless steel tube assembly when in operation. Parts of handle are nickel plated brass.
2. The handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of – 40°F to 150°F with a minimum burst of 360 psi.
3. All siphon hose is constructed of nitrile rubber.
4. Will operate without adjustment on any air pressure from 35 psi to 175 psi. Do not operate at less than 35 psi.
5. Equipped with 1/4" NPT Female Air inlet
6. Proper safety equipment should be utilized at all times when operating this unit.
Alspray Straight Fog Gun w/ Plastic Bottle
1. Siphoned chemical will only come into contact with stainless steel tube assembly when in operation. Parts of handle are nickel plated brass.
2. The handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of – 40°F to 150°F with a minimum burst of 360 psi.
3. All siphon hose is constructed of nitrile rubber.
4. Will operate without adjustment on any air pressure from 35 psi to 175 psi. Do not operate at less than 35 psi.
5. Equipped with 1/4" NPT Female Air inlet
6. Proper safety equipment should be utilized at all times when operating this unit.
Alspray Fog Gun Curved
1. Siphoned chemical will only come into contact with stainless steel tube assembly when in operation. Parts of handle are nickel plated brass.
2. The handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of – 40°F to 150°F with a minimum burst of 360 psi.
3. All siphon hose is constructed of nitrile rubber.
4. Will operate without adjustment on any air pressure from 35 psi to 175 psi. Do not operate at less than 35 psi.
5. Equipped with 1/4" NPT Female Air inlet
6. Proper safety equipment should be utilized at all times when operating this unit.
Alspray Fog Gun Straight
1. Siphoned chemical will only come into contact with stainless steel tube assembly when in operation. Parts of handle are nickel plated brass.
2. The handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of – 40°F to 150°F with a minimum burst of 360 psi.
3. All siphon hose is constructed of nitrile rubber.
4. Will operate without adjustment on any air pressure from 35 psi to 175 psi. Do not operate at less than 35 psi.
5. Equipped with 1/4" NPT Female Air inlet
6. Proper safety equipment should be utilized at all times when operating this unit.
Dairy / Poultry / Food Processing
- QUAD-T Dairy Teat sprayer for saving iodine and your wallet
- Casing Valves gives meat packers complete hand control over water supply rate
- Sanitizing Nozzle works like a water saver, but the stainless steel, “cat eye,” tip provides a fine, precise spray pattern
- Poultry Cleaning Lung Rake removes cavity parts and flushes at the same time
Buy Your Dairy / Poultry / Food Processing Sprayers Today!
Sanitizing Nozzle
QUAD-T Dairy Teat Sprayer
1. Fine mist hollow cone spray pattern: approximately 7 oz/min @ 30 psi
2. Removable screen for cleaning and clog protection
3. Machined stainless steel spray tip assembly.
4. Stainless steel tube assembly.
5. 4 ply flexible rubber body with stainless valve assembly.
6. 1/4" NPT female thread
7. 10 1/4" overall length
Model CV Brass
Model CV Stainless
1. Overall length is 10 1/8"
2. Equipped with 1/2" NPT connection machined brass fittings
3. Operates on normal water line pressure
4. Handle hose is manufactured from neoprene base tube and wrapped with 3 ply reinforcement carrying a temperature range of - 40°F to + 150° F and a minimum burst 360 psi.
5. Tube assembly is 300 series stainless steel
Specialty Cleaning Tools
- 3-in-1 Superspray allows water, air, or both for versatile cleaning
- Water-driven Chemical Sprayer uses water to power the siphon, for rapid chemical application
- Right-Angle Air or Liquid Sprayer also comes in the quick-connect version: add multiple lengths or spray patterns for quick change-out
- 1/4″, 3/8″, or 1/2″ NPT
Buy Your Specialty Cleaning Tools Today!
3 In 1 Super Spray
Right Angle Quick Connect Extension and Handle Assy
Right Angle Quick Connect Handle Assy ONLY
Right Angle Air Blow Gun and Liquid Sprayer
-
- 1/4" NPT Air Inlet
-
- Solid brass extension & handle
-
- 4 ply flexible rubber body - 175 psi max
-
- Fixed models available in 12", 24" and 36" lengths
-
- QRS Adapter required for Garden Hose Water Supply - sold separately.
FLKT – Pool Filter – Air Filter – Sprayer
Water Driven Type B Chemical Sprayer only
1. Overall length of type B sprayer is 13"
2. Made of stainless steel and nicked plated brass components.
3. Flexible rubber body is manufactured from neoprene base tube and wrapped with 3-ply reinforcement with a temperature range of -40°F to + 150°F and a minimum burst of 360 psi.
4.1/4" NPT female inlets.
5. Includes QRS Adapter
Water Driven Type B Chemical Sprayer w/ 8′ Siphon Hose
You can see the level of chemical agent within the bottle throughout the operation but if all eyes are focused on the spraying action when supplies are depleted, the operator is alerted by a sputtering sound as the bottle empties.
1. Overall length of type B sprayer is 13"
2. Made of stainless steel and nicked plated brass components.
3. Flexible rubber body is manufactured from neoprene base tube and wrapped with 3-ply reinforcement with a temperature range of -40°F to + 150°F and a minimum burst of 360 psi.
4. Includes 8Ft. nitrile rubber siphon hose and QRS adapter
5. Sanitizer has 1/4" NPT female inlets.
6. Siphoned Chemical contacts only with stainless steel
Water Driven Type B Chemical Sprayer w/ Bottle Assembly
1. Overall length of type B sprayer is 13"
2. Made of stainless steel and nicked plated brass components.
3. Flexible rubber body is manufactured from neoprene base tube and wrapped with 3-ply reinforcement with a temperature range of -40°F to + 150°F and a minimum burst of 360 psi.
4. The siphon hose is constructed of nitrile rubber.
5. Sanitizer has 1/4" NPT female inlets.
6. Chemical from bottle contacts only with stainless steel
7. Includes QRS Adapter
Fine Spray
Accessories
- Add-on 4 different Hose-End patterns for your Water Saver
- Extension Tips for your Air Saver or Air/Liquid sprayer; various lengths
- Connection adapters
- Siphon sources
- Much more!
Buy Your Accessories Today!
Replacement Hose Ends Only
Standard water saver nozzle ends are smooth molded rubber.
Click here if you are looking for Heavy Duty Replacement Hose Ends.
Right Angle Quick Connect Extension ONLY
Jet Spray Quick Connect Extension ONLY
Reducer
Custom Hoses
Black general service air and water hose for industrial, agriculture, and construction where oil is not a significant factor.
Variety of fittings available with brass ferrule crimping.
1 ft. to 700 ft. lengths
Remains flexible at low temperatures
Specifications
1. EPDM rubber with polyester yarn reinforcement.
2. Temperature range of -40° F to 200° F
3. Pressure maximum of 200 psi
Fittings shown are examples. Other fittings may be available if we can crimp on to the hose.
For pricing please contact the factory with your requirements.
888-898-5666 or e-mail us.
Featured Products
Water Saver – Jet Stream
Overall length 8 7/8"
All brass fittings with rubber bumpers to prevent scratching if dropped on equipment.
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal city or well water pressure. Not for use on boosted water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
Water Saver – Fan Spray
Overall length 8 7/8"
All brass fittings with rubber bumpers to prevent scratching if dropped on equipment.
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal city or well water pressure. Not for use on boosted water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
Water Saver – Open Flow
Overall length 8 7/8"
All brass fittings with rubber bumpers to prevent scratching if dropped on equipment.
Equipped with 3/4" garden hose thread hose connection (standard garden hose connection - USA and European BSP)
Hose ends are interchangeable with other model water savers.
05LP and 05MP - designed to withstand water to 150°F on continuous use or 212°F on occasional operation with proper personal protective equipment.
For use on normal city or well water pressure. Not for use on boosted water pressure.
05RP and 05SP - for use on cold water only.
Max operating pressure for 05RP and 05SP is 72 PSI (7 BAR)
01.
Easy to Operate
Air or Liquid
Simply pick it up and flex the rubber nozzle for instant flow control.
02.
Historical Durability
Heavy-duty
No levers or buttons to fumble with or break. Stainless steel valve assembly will not corrode. Drive over the Air Saver with your vehicle, fork truck or pallet jack and it will still work.
03.
Commercial Quality
Proudly Made in the USA
Machined brass head and molded EPDM rubber. Protects hose end from damage. No messy leaks.
CUSTOMER REVIEWS
Our Testimonials
Don't just take our word for it. Look at what our customers are saying.
I have used these nozzles for years they are the best. Yes they are spendy but well worth every penny if you are in any doubt on how well they are just try one and you will see. I have tried others of similar but all fail in comparison to these. I do not work for this company but they are tremendous.
Love the product! Best nozzle to use with full flow of water. They last a long time. Had mine now for 10 years and still works like new. Ordered one for a friend.
Lonn Manufacturing has been making these nozzles for many years. There’re a bit pricey but well worth it. They work great and last forever. I’ve had these in daily use in my shop for years with no air leaking.
Neighbor had one of these while camping in the Florida Keys in 1981. I’ve been looking for one since. Just like I remembered. Works perfectly. No leaks. When camping, I attach a Y-shaped connector to the water outlet. One side goes to the camper. The other is connected to this. You can use the water or wash your hands or clean something at the water outlet without having to disconnect something or open/close the valve. Very convenient.
Still have my first one from 2001. Great Product. Just needed three more for the farm. There are not many water hose nozzles that you can say you have had for more than 15 years. Very Durable
I ordered a water saver from this company after finding out that they were the original manufacturer for the nozzle type. The nozzle not only arrived in exceptional time through USPS Priority ( which was the default setting, I paid no extra for it), but when the package arrived, on the back of the packing slip was a handwritten letter from the president of the company, explaining that their website had actually charged me about 8 dollars more than it should have. Not only would I have never noticed this error, but they sent me an extra nozzle end as an apology. I tested both nozzles immediately, and they both work wonderfully, and better than I even expected. Great company, great people, and my absolute favorite nozzle for commercial and residential use. I now will take it as a personal offense if anyone uses products that aren’t from Lonn. 11/10 for Lonn Manufacturing!
These are some of my most prized possessions!!! I got these to replace the ones that I’ve had for some 25 or more years!!! Yeah someone is making a cheaper one but I know how good the original ones are. I’ve been looking for them for years to get more for friends and family but truthfully I’m surprised to see them still in business because once you get one you won’t need to replace it in lifetimes! Thank You for still being the best ever!!!!
Wow, this water nozzle works great. My brother in law had one and my husband said I needed to buy this so we have one. After using it, I am buying my mom one for Mother’s day. She goes through her water sprayers like crazy. They are always breaking. I think she will like this one much more. You can really control how much water comes out of these and if you let it go, it will automatically stop spraying. I like that you can spray at long distances as well as a a gentle stream. There is much more control with this Water Saver. Who knew a hose could do this?
First one I got lasted 15 years bought this as a backup for when my first one gets lost permanently by the kids. This will never break or wear out. from what I can tell. No fancy spray just durable 🙂
